Patco D9100: Flame Retardant Aircraft Waterseal Tape BMS8 346-TapeMonster

Patco

Patco D9100: Flame Retardant Aircraft Waterseal Tape BMS8 346
  • Price:
  • $99.23
  • + Act Now To Receive FREE Shipping Promo!
2 in. x 36yds
3 in. x 36yds
4 in. x 36yds

Meets Boeing Spec BMS8 346

Clear, Transparent Tape. White removable liner.

Patco D9100 Is A Flame Retardant Aircraft Waterseal Tape

Tough, Elastic Backing.

D9100 Tape Bonds Directly Over Wet Sealants.

Floor Joint Sealing On Aircraft Decking In All Wet Areas Including: Entryways, Galleys, Lavatories, & More.

Patco D9100 Is Designed For Moisture Barrier Applications.

Surface Protection For High Wear Areas.

Specifications: FAR 25.853(a), BMS 8-346 Type I & II Class 1, Airbus 10-05-004, ABS 5093, and ABD 0031 Para 7.3.2 and 7.4; Fokker Fk05-193 NSN 8030-01-542-1415

Backing: Interior-Grade Aromatic Polyurethane

Adhesive: Urethane-Based

Liner: 94# Coated Kraft Paper

Colors: Transparent



PayPal Logo

PatcoD9100

 

Patco® D9100 BMS8 346

Flame Retardant Aircraft Waterseal & Corrosion Inhibitor Tape

Patco® D9100 Tape Is A tough, exceptionally elastic and durable polyurethane film tape designed as a moisture seal for floor joints in wet areas (galleys, lavatories, entryways) of aircraft floors. Recommended by Boeing Commercial Airplane Group. Meeting Boeing Spec BMS8 346. Patco D9100 Tape Is Pressure sensitive, repositional, flame retardant and sealant compatible Tough and durable. Water resistant. Helps prevent corrosion on floor structure. Ease of application. Meets all interior F.R. requirements. Can go directly over wet sealant. Fast application. Allows visible inspection. Allows wide width usage. Can be die-cut to various shapes.

Documentation/Certificate: Factory Certificate of Conformance and a Burn Test Certificate showing test results that the tape meets the burn test standards of F.A.R. 25.853a

2" rolls / 24 per case

3" rolls / 16 per case

4" rolls/ 12 per case

Nominal Tape Widths vs Actual Widths

Tape rolls are cut to standard tape industry metric widths of approx. 24mm per 1-inch of nominal width ordered. As a result ACTUAL tape widths are normally 5% narrower than the NOMINAL width shown in inches. Examples:

  • 1" Nominal width = 15/16" (24mm) Actual width
  • 2" Nominal width = 1-7/8" (48mm) Actual width
  • 3" Nominal width = 2-13/16" (72mm) Actual width

Note that tape rolls are NOT guaranteed to be splice-free.

 

Back to the top