Carpet and Mounting Tape: Double Coated Cloth (Polyken 105C 2") – TapeMonster
Carpet and Mounting Tape: Double Coated Cloth (Polyken 105C 2")- Sold By TapeMonster.com

Carpet and Mounting Tape: Double Coated Cloth (Polyken 105C 2")

Polyken

  • $11.05


Polyken 105C 2 inch 25 yard is a double-sided tape on a cloth carrier which provides residue-free removal from most surfaces, so it's commonly used for temporary carpet and flooring hold-down in the convention and exhibition industries or for short-term event flooring where you need to leave behind a clean surface. Polyken 105C Multi-Purpose Double-Coated Carpet Tape, which is sometimes referred to as double-sided gaffers tape, offers up to 40 ounces per inch of peel adhesion and can even be used like a lint roller to pull up microscopic dirt and loose residue. This tape comes on blue color film liner, which makes it appropriate for applying the tape over larger areas.

Product Applications

      • Carpet hold-down, especially in conventions and exhibitions
      • Aircraft manufacture and construction uses
      • General mounting and holding
      • Temporary holding applications for industrial use
      • Holding plastic drop cloths in place while painting
      • Pulling up loose residue from a surface like a lint roller

Please note removable tape is designed to not leave adhesive residue behind; however it may still pull up loose debris, finish, etc. from a substrate it is applied to depending on many conditions such as length of time applied, chemicals used to clean the substrate, and the composition of the substrate itself. We always recommend testing first on an inconspicuous area to ensure it removes as desired.

 

Technical Information

Polyken 105C 2 inch 25 yard Multi-Purpose Double Coated Carpet Tape
  • Adhesive: rubber   
  • Carrier/Backing: cloth
  • Release Liner: low-density polyethylene (LDPE) film
  • Thickness: 13 mils (carrier, adhesive, liner) 11 mils (carrier, adhesive) 2 mils (liner)   
  • Adhesion: 40 ounces per inch (to stainless steel test panel)
  • Tensile Strength: 20 pounds per inch (longitudinal)
  • Service/Operating Temperature: 40°F to 200°F
  • VOC Content: < 1 g/L
  • Certifications: Boeing BAC5034-4 Section 5.1.a(1)(a); can contribute toward satisfying EQ Credit 4.1 (Low Emitting Materials) under LEED
  • Core: 3" diameter
Note: Specifications are those given by manufacturers and are not tested for accuracy.

Additional Product information

105C Polyken Double Coated Carpet Tape pdf
Polyken 105C Specification

 

 Click here for Manufacture's website.

 

 

Nominal Tape Widths vs Actual Widths

Tape rolls are cut to standard tape industry metric widths of approx. 24mm per 1-inch of nominal width ordered. As a result ACTUAL tape widths are normally 5% narrower than the NOMINAL width shown in inches. Examples:

  • 1" Nominal width = 15/16" (24mm) Actual width
  • 2" Nominal width = 1-7/8" (48mm) Actual width
  • 3" Nominal width = 2-13/16" (72mm) Actual width

Note that tape rolls are NOT guaranteed to be splice-free.

Back to the top