Packaging Tape: Shurtape HP-400 High-Performance Grade – TapeMonster
Packaging Tape: Shurtape HP-400 High-Performance Grade - Sold By TapeMonster

Packaging Tape: Shurtape HP-400 High-Performance Grade

Shurtape

  • $3.96


Shurtape HP-400 High-Performance Grade Packaging Tape is a premium-grade biaxially oriented polypropylene film (BOPP) packaging tape used in demanding case sealing environments. Its aggressive rubber adhesive provides consistent and secure carton closure. Shurtape HP 400 is ideal for large, bulky or heavy content cartons in moderate to severe handling environments. Excellent for packaging, bundling, repairing cartons and paper and film bags. Recommended in higher speed, critical closure applications. It provides extra high bonding strength and holding power on corrugated cartons. Use for a tough, aggressive and consistent case sealing performance.

 

Case 2 inch x 36 rolls

Case 3 inch x 24 rolls

 

Technical Information

Shurtape HP400 High-Performance Grade Packaging Tape

  • Adhesive: synthetic rubber-resin
  • Carrier/Backing: 40 micron biaxially-oriented, cast polypropylene (BOPP) film
  • Thickness: 2.5 mils (carrier, adhesive) 
  • Adhesion: 54 ounces per inch (to stainless steel test panel)
  • Adhesion to Backing: 5 ounces per inch
  • Tensile Strength: 33 pounds per inch (longitudinal) 58 pounds per inch (transverse)
  • Application Temperature: 35°F to 110°F
  • Service/Operating Temperature: 20°F to 150°F
  • Elongation: 150%
  • Holding Power to Fiberboard: 25,000+ minutes
  • Certifications: ASTM D 1974-98 (2003); CID A-A-1684C; FDA Indirect Contact CFR 21, 175.105; FDA Indirect Contact CFR 21, 177.1520
  • Core: 3" diameter
Additional Product Information
HP400 Safety Data Sheet HP400 Specs PDF HP400 Shurtape Regulatory Compliance Letter pdf icon

Safety Data Sheet

HP400 Specifications

Regulatory Compliance Letter

 

Click here for Shurtape website.

 

 

 

Nominal Tape Widths vs Actual Widths

Tape rolls are cut to standard tape industry metric widths of approx. 24mm per 1-inch of nominal width ordered. As a result ACTUAL tape widths are normally 5% narrower than the NOMINAL width shown in inches. Examples:

  • 1" Nominal width = 15/16" (24mm) Actual width
  • 2" Nominal width = 1-7/8" (48mm) Actual width
  • 3" Nominal width = 2-13/16" (72mm) Actual width

Note that tape rolls are NOT guaranteed to be splice-free.


We Also Recommend

Back to the top