Shurtape HP-400 Packaging Tape: High-Performance Grade

Shurtape

$8.46

Color

Size

2 in. x 110yds

3 in. x 110yds

Package Size

Roll

6 Pack

Case

Qty

Certifications: ASTM D 1974-98 (2003); CID A-A-1684C; FDA Indirect Contact CFR 21, 175.105; FDA Indirect Contact CFR 21, 177.1520
Adhesive: synthetic rubber-resin
Thickness: 2.5 mils (carrier, adhesive)
Adhesion: 54 ounces per inch (to stainless steel test panel)
Adhesion to Backing: 5 ounces per inch
Tensile Strength: 33 pounds per inch (longitudinal) 58 pounds per inch (transverse)
Made in USA

Collections: Packaging Tape:, Products, Shurtape Tape Products:

Type: Packaging Tape

Shurtape HP-400

High-Performance Grade Packaging Tape

Shurtape HP-400 High-Performance Grade Packaging Tape is a premium-grade biaxially oriented polypropylene film (BOPP) packaging tape used in demanding case sealing environments. Its aggressive rubber adhesive provides consistent and secure carton closure. Shurtape HP 400 is ideal for large, bulky or heavy content cartons in moderate to severe handling environments. Excellent for packaging, bundling, repairing cartons and paper and film bags. Recommended in higher speed, critical closure applications. It provides extra high bonding strength and holding power on corrugated cartons. Use for a tough, aggressive and consistent case sealing performance.

Case 2 inch x 36 rolls

Case 3 inch x 24 rolls

Technical Information

Shurtape HP400 High-Performance Grade Packaging Tape

Adhesive: synthetic rubber-resin
Carrier/Backing: 40 micron biaxially-oriented, cast polypropylene (BOPP) film
Thickness: 2.5 mils (carrier, adhesive)
Adhesion: 54 ounces per inch (to stainless steel test panel)
Adhesion to Backing: 5 ounces per inch
Tensile Strength: 33 pounds per inch (longitudinal) 58 pounds per inch (transverse)
Application Temperature: 35°F to 110°F
Service/Operating Temperature: 20°F to 150°F
Elongation: 150%
Holding Power to Fiberboard: 25,000+ minutes
Certifications: ASTM D 1974-98 (2003); CID A-A-1684C; FDA Indirect Contact CFR 21, 175.105; FDA Indirect Contact CFR 21, 177.1520
Core: 3" diameter

	Additional Product Information

Safety Data Sheet	HP400 Spec's	Regulatory Compliance Letter

Click here for Shurtape website.

Nominal Tape Widths vs Actual Widths

Tape rolls are cut to standard tape industry metric widths of approx. 24mm per 1-inch of nominal width ordered. As a result ACTUAL tape widths are normally 5% narrower than the NOMINAL width shown in inches. Examples: