Shurtape HP-500 Packaging Tape: Heavy-Duty Grade – TapeMonster

Shurtape HP-500 Packaging Tape: Heavy-Duty Grade

Shurtape

  • $0.00


 

Always Free Shipping On All Tape Orders,  Rolls or Cases, With TapeMonster

Shurtape HP-500 

Packaging Tape: Heavy-Duty Grade

 

Shurtape HP-500 Heavy-Duty Grade Packaging Tape is a premium-grade biaxially oriented polypropylene film (BOPP) packaging tape. It features one strip sealing and is extremely tough for the most demanding manual or automatic packaging applications. It has a superior pressure sensitive rubber adhesive which offers excellent quick grab with aggressive holding power for dependable carton closure. Shurtape HP 500 is ideally suited for heavy, bulky, carton sealing in high stress applications and extreme handling conditions (recommended for overstuffed or under filled cartons and recouperage). Used for packaging, bundling, repairing cartons, and for paper and film bags. Adheres well to corrugated cartons, paper, film and a variety of other substrates.

 

Case 2 inch x 36 rolls

Case 3 inch x 24 rolls

 

Technical Information

Shurtape HP-500 Heavy-Duty Grade Packaging Tape

  • Adhesive: synthetic rubber resin 
  • Carrier/Backing: 50 micron biaxially-oriented, cast polypropylene (BOPP) film
  • Thickness: 3 mils (carrier, adhesive)  
  • Adhesion: 58 ounces per inch (to stainless steel test panel)
  • Adhesion to Backing: 6 ounces per inch
  • Tensile Strength: 42 pounds per inch (longitudinal) 74 pounds per inch (transverse)
  • Application Temperature: 35°F to 110°F
  • Service/Operating Temperature: 20°F to 150°F
  • Elongation: 150%
  • Holding Power to Fiberboard: 30,000+ minutes
  • Certifications: ASTM D 1974-98 (2003); ASTM D 5486M-06, Type III; CID A-A-1684C; FDA Indirect Contact CFR 21, 175.105; FDA Indirect Contact CFR 21, 177.1520
  • Core: 3" diameter

 

 

Nominal Tape Widths vs Actual Widths

Tape rolls are cut to standard tape industry metric widths of approx. 24mm per 1-inch of nominal width ordered. As a result ACTUAL tape widths are normally 5% narrower than the NOMINAL width shown in inches. Examples:

  • 1" Nominal width = 15/16" (24mm) Actual width
  • 2" Nominal width = 1-7/8" (48mm) Actual width
  • 3" Nominal width = 2-13/16" (72mm) Actual width

Note that tape rolls are NOT guaranteed to be splice-free.


We Also Recommend


Back to the top